Basics of Groove Track 2: Lesson 8 – FINISH!!!

#1077 The Basics of Groove Part 2-Lesson 8


 

DOWNLOAD THE LESSON RESOURCES

Download the sheet music

Daily practice log sheet for your practice log book

DON’T SKIP THIS STEP!!! There’s no use in running a race if you’re gonna skip blowing past the finish line. Take a few minutes, download this FINISH! worksheet and fill it out. You will be amazed at all of the work you put in and all of the progress you made. At the end, you’ll have the chance to plan your next step for your drumming.

See an example completed FINISH! worksheet

Download .doc FINISH! worksheet

 

Assembly Line and Testing Criteria

Assembly Line for this Lesson:

Step #1: Pick a Drum Fill
Step #2: Play Drum Fill with Groove (no crash)
Step #3: Play Drum Full with Crash
Step #4: Hat, Fill, Ride, Fill
Step #5: Repeat Steps #1-4 with 4 More Fills


Testing Criteria for this Lesson:

Level 1: 50 bpm
Level 2: 65 bpm
Level 3: 90 bpm
Level 4: 100 bpm
Level 5: 110 bpm

NOTE: Be sure to achieve Level 4 tempo for Groove Series A-F before moving on to the next lesson. Groove Series G and H have kick drum patterns that may not allow you to reach certain tempos. That’s ok. The purpose is not speed as I said before, but learning it to that tempo will ensure you have worked the material sufficiently. You should keep reviewing the material after you move on until you reach the Level 5 bpm.

Your progress so far:

[wpc_progress_bar course=”BOG2 2020″]
 
Return To Lesson Track Homepage
 

[memb_has_any_tag tagid=1016][/memb_has_any_tag]